Corvette C8 Z07 High Wing — Carbon Fiber

As seen on Horsepower Obsessed. The wing that defines the Z07 package — engineered from CAD, not splashed from a warped stock part.

The Z07 high wing is the single most recognizable piece of aero on the C8 platform, and the RSC Z07 High Wing brings it to your Z06 or E-Ray with the accuracy and build quality the factory piece deserves. This is not a mold pulled off someone's stock wing. It was reverse engineered with the most accurate laser scanning technology available and 3D engineered to be perfectly symmetrical from tip to tip, with CNC-milled tooling cut directly from CAD data.

Why does that matter? A stock Z07 wing warps when it's removed from the car — so molds "splashed" off a stock part are warped before the first layup ever happens. The result is an asymmetric wing that loads unevenly at speed, producing vibration and wobble. The RSC Z07 Wing eliminates the problem at the source: geometric accuracy from the tooling up.

Every wing ships with RSC's proprietary chassis-mount bracket system — the cleanest and strongest bracket system on the market, engineered to withstand more load than the stock Z07 wing brackets. And because the Z07 Wing anchors a complete RSC rear-end system, you can bundle it with our exclusive carbon fiber Z07 Wing Risers and Spoiler Hole Covers to create a raised, fully finished look no factory car offers.

Construction & Materials

Manufactured using pre-impregnated (prepreg) visible carbon fiber saturated with aerospace-grade epoxy resin, then autoclave-cured under precise pressure and temperature for maximum strength-to-weight ratio. This is the same manufacturing process used on factory Corvette carbon fiber components and by every major exotic marque, and it produces that high-end supercar fit and finish discerning owners demand. The wing utilizes a special high-temperature resin system that resists discoloration and warping not found on lower-cost options, and is finished with a premium UV-inhibiting clear coat that resists hazing and yellowing under harsh sunlight. The flat, consistent weave pattern achieved through autoclave curing can't be matched by less expensive wet-laid products.

A note on "visible carbon": the term refers to the weave being exposed — it is not a type of carbon fiber. Many products advertised as visible carbon fiber are only a top layer of carbon over fiberglass or cheaper material. The RSC Z07 Wing is constructed entirely of prepreg carbon fiber.

RSC Chassis-Mount Bracket System

Included with every wing: two powder-coated steel mounting bases and two billet aluminum bumper brackets with stainless steel threaded inserts and a full stainless steel hardware kit. An exclusive RSC design that withstands more load than the factory Z07 brackets.

Fitment

Designed specifically for Corvette C8 factory wide-body models, both Coupe and Convertible (HTC) body styles:

• 2023–2027 Corvette C8 Z06 (all trims)
• 2024–2027 Corvette C8 E-Ray (all trims)
• 2027+ Corvette C8 Grand Sport

Note: This wing is designed for the wide-body C8 variants and DOES NOT FIT the Corvette C8 Stingray, which uses a narrower chassis and different rear bodywork.

Complete the Look: Z07 Wing Risers

The RSC Z07 Wing can be paired with our exclusive Z07 Wing Risers (RSCVET3039) — matching prepreg carbon fiber stanchions that raise the wing approximately 1.7″ over the OEM stanchion height. The added height changes the entire stance of the car: the wing sits proud of the rear deck for a more aggressive, race-derived silhouette you won't see on a factory-spec Z07 car. Because the risers are visible carbon like the wing itself, the raised stanchions read as one cohesive design rather than an add-on.

The risers are a direct replacement for the standard stanchions — they utilize the existing mounting hardware and mounting locations, install without bumper removal, and are supplied with custom weatherproof closed-cell foam gaskets to prevent marring of the wing or rear bumper.

Complete the Look: Spoiler Hole Covers

Upgrading a Z06 or E-Ray that came with the factory rear spoiler? Removing it leaves exposed mounting holes in the rear bumper. Our Spoiler Hole Covers (RSCVET3056) are a custom-designed 3-piece kit in 100% prepreg carbon fiber that conceals every exposed hole for a clean, finished result. Molded radii on the edges create a smooth waterfall transition into the bumper with no unfinished edges — a true OEM+ look that matches the weave and finish of your RSC wing. Applied with supplied 3M VHB double-sided tape; works with multiple wing stanchion designs. Not necessary for cars equipped with the Z07 wing from the factory.

Options & Bundles

• OEM-Style Z07 Wing Stanchions — RSCVET3049 (standard configuration)
• + 1.7″ Wing Risers — RSCVET3049R (as shown in photos)
• + Spoiler Hole Covers — RSCVET3049H
• + Hole Covers + Risers — RSCVET3049HR (the complete raised-wing conversion)

Installation

High-quality, step-by-step printed instructions are included with each order to walk you or your technician through the installation using the included RSC bracket system and stainless hardware.

Specifications

• Part Number: RSCVET3049 (base) / RSCVET3049R, RSCVET3049H, RSCVET3049HR (option combinations)
• Material: Pre-impregnated (prepreg) visible carbon fiber, autoclave-cured
• Finish: Exposed gloss carbon fiber with premium UV-inhibiting clear coat
• Mounting: RSC proprietary chassis-mount bracket system (powder-coated steel bases, billet aluminum bumper brackets, stainless hardware)

Why Choose the RSC Z07 Wing

Factory Z07 wings from the dealer carry a significant premium and often require extended wait times or ordering constraints. RSC's Z07 High Wing delivers that unmistakable Z07 aesthetic with construction quality that matches or exceeds factory standards — plus a stronger bracket system, tooling accuracy that splash-molded copies simply can't achieve, and exclusive riser and hole-cover options that let you build a look the factory never offered — at a price that makes the upgrade accessible.