ST Carbon Fiber Side Skirts for Corvette C8 by RSC

ST Carbon Fiber Side Skirts for Corvette C8 Limited Edition by RSC

1 review


Regular price $2,945.00
Shipping calculated at checkout.

LIMITED EDITION: LIMITED PRODUCTION OF 50 UNITS WORLD WIDE - Set your Corvette C8 apart from the rest with these limited edition Carbon Fiber Side Skirts from Racing Sport Concepts.  Made from 100% pre-impregnated carbon fiber and double bonded for added strength and a finished product on every side.  Pre-Order now for January 2022.  Each Skirt will be individually #'d and addressed to the purchaser.
Bottom side of Corvette C8 Carbon Fiber Splitter by RSC

Superior Quality

100% Carbon Fiber

What makes RSC Carbon Superior

Weave Symmetry, Clear Coat Depth, Clarity

Carbon Fiber Side Skirts for Corvette C8 by RSC

Function Meets Form

A Splitter for Car Shows & Track Days

C8 Corvette body kit side view
Front Three Quarter View of Corvette C8 Convertible with Carbon Fiber Body Kit

Questions about RSC's C8 Carbon Fiber Aero Program

Are your parts made from 100% Carbon Fiber or is it just the top layer?

All RSC Carbon Fiber Products are 100% Pre-Impregnated Carbon Fiber.  No other materials such as Fiberglass or CFRP are utilized. Pre-Impregnated Carbon Fiber is the strongest, lightest, highest quality Carbon Fiber available for these parts. Please see our "What is Pre-Impregnated Carbon Fiber & why is it better?" FAQ for more information.

Will I have to drill holes in my bumper to mount this part?

No you will not. Both Z51 optioned C8 Corvettes & non-Z51 optioned C8s come with these hole locations and retainer clips pre-installed. You will simple remove the stock screws and then re-use them after placing the RSC Carbon Splitter in the correct location on your vehicle. This process is entirely reversible without damage to your C8.

Does the splitter come supplied with hardware?

We do not supply hardware for this particular product as it was designed to re-utilize the stock hardware that comes withyour C8 Corvette. You already have everything necessary to complete the installation in your C8's Front Bumper

How long does it take to install the RSC Carbon Front Splitter?

Usually it takes 15-30 minutes to remove the stock Z51 front splitter and install the RSC Carbon Splitter. On a non-Z51 car the process is similar just no plastic splitter to remove. You DO need to remove the hardware from your bumper that will be re-used during the installation of your RSC Front Splitter

Why does shipping show as unavailable to my destination?

If you add multiple products to your cart and some of them are out of stock the shipping options will display as unavailable. Please contact us at for assistance or remove any out of stock items from your cart and try again. We apologize for the inconvienence.

What if I get the splitter & I decide I don't like it?

No problem. All RSC products come with a 30 day no hassle return policy. If you just simply choose to return the product because you do not like it you will be responsible for the shipping costs but RSC will refund you in full for the price of the product as long as we receive the product undamaged in like new condition within 30 days. NOTE: Keep your original packaging in the event that you may want to return your product. If there is some type of product defect or quality issue; RSC will most likely exchange or return the item at our cost. We will always do our best to treat you the way we would expect to be treated. Please review our terms and conditions for more information.

What if my product does not fit or I am not satisfied with the quality?

Send it back. Shoot us an email with a description of your issue or concern. If you receive a product that is not as described or does not fit we will immediately send you a replacement or send you a return label and refund your money upon our receiving the product back in our possession. Different people have different expectation levels and we know that. We do our best to deliver the finest products available but if you are not satisfied with the product you receive please give the opportunity to reach a solution that you are satisfied with.

What is Pre-Impregnated Carbon Fiber & Why is it superior?

Pre-Impregnated Carbon Fiber is a type of Carbon Fiber fabric which is pre-impregnated with resin prior to the part layup process.  This creates a perfect resin distribution throughout the material.

If you can imagine carbon fiber as a chain; the weakest link of the chain will always fail first. With wet-layup methods or "Resin Infusion" a piece of dry carbon fiber cloth is laid in a mold and the resin is either painted onto the cloth, or sucked into the material by using a vacuum.  The issue with these inferior methods is the inconsistency in the resin distribution and tendency to have weak points which are more prone to failure. 

With Pre-Impregnated Carbon Fiber, you get a much stronger product due to the lack of those weak links. In addition to the strength, you also achieve a more symmetrical and uniform weave pattern which we all love. 

Because the material is already impregnated with resin, it does not suffer from the distortion created by the resin infusion. Another benefit is weight, because the resin is evenly distributed by a complex manufacturing process. Only the correct amount of Epoxy resin is used which results in less weight & more strength.

Finally, all of our parts are cured using state-of-the-art Autoclaves, enhancing the strength and shape of the part and finish quality.

Do you offer the RSC Front Splitter in some sort of paintable material such as Fiberglass?

We only manufacture parts out of carbon fiber. Our products are designed around the strength and material charecteristics of Carbon Fiber not Fiberglass or other materials. Our tooling and product development process is specifically optimized for Carbon Fiber production, making the use of inferior materials an ineffective solution for lowering cost. If you wish to paint your product you can paint over the clear coat supplied with our Carbon products please email us to obtain more information on this process. We do not offer "Pre-Paint Matched Painted" versions at this time.

Customer Reviews
5.0 Based on 1 Reviews
5 ★
4 ★
3 ★
2 ★
1 ★
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
Beverly M.
United States United States

RSC Carbon Fiber C8 Side Skirts

Those are beautiful. Why does Chevrolet not buy these and offer them on a car? I would love them if I Had a C8. If you build one you have order an **** piece to go on your car. It doesn’t even look like it goes all the way across the sides. They look easy to install with bolts? Oh well. Too bad I don’t have a car to put them on. I would jump on these in a heartbeat. Are you the same people that offered the Wide Body with all the carbon fiber on it? I loved that car. It was the C8 RR. That was the only C8 I wanted. I just wouldn’t know who to put all this on a car. Keep up the great work!! Racing Sports except with no spaces.